Danfoss OMT FX Hydraulic Motor Reseal - model No 151B3228-2

A Danfoss OMT FX hydraulic motor and brake assembly (model number 151B3228-2) was brought to our workshop for repair.  Our engineer dismantled the unit and cleaned all parts.  The gear wheel was severely worn, the output shaft was worn at the seal and the seals were stiff.  These findings were communicated to our customer, who instructed for the unit to be resealed only.  The unit was resealed, reassembled and tested.

For more information on our repair service please contact us on 01603 424880.

Gearwheel (severely worn)

Case Maxi Sneaker (Series C) hydraulic repair

Our on-site hydraulic engineer was called out to identify the hydraulic problem on a Case Maxi Sneaker (Series C).  The motor spool valve relief valve setting was checked and reset.  The engineer then performed a complete hydraulic oil change and fitted a new hydraulic motor and hydraulic filter.

The machine was checked for leaks and operation and our engineer left the site once satisfied that everything worked OK.

Please contact us for more information on our on-site service on tel: 01603 424880 or mail@pandrhydraulics.com.

Case Maxi Sneaker (Series C)

Hydraulic brake hub inspection

An unidentified unit was brought into our workshop for an inspection and test.  The unit was dismantled, all parts cleaned and inspected for wear.  Our experienced hydraulic engineer identified the unit and quoted our customer for repair using OEM parts or cheaper alternatives.  The hydraulic brake hub was repaired and tested on our in-house test rig.

hydraulic brake hub 

Please contact us for more information on our repair service on tel 01603 424880 or mail@pandrhydraulics.com.

Poclain hydraulic brake/motor (MSE02) inspection

A Poclain hydraulic brake/motor (model number MSE02) was brought into our workshop for inspection.  The unit was dismantled and all parts inspected.  The internal parts were badly damaged which indicated the unit had been run dry.  Unfortunately the unit was considered beyond economical repair.

image of damage to internal parts

image of damage to internal parts

Not only can we inspect and repair units, but we sell new products at very competitive prices backed by the manufacturer's waranty.  Even if we do not stock a certain item we will endeavour to source it for our customer.  For more information on our services and products please contact us on tel 01603 424880 or mail@pandrhydraulics.com.

Hy-Pro Directional Valve - V5-60

A customer ordered a Hy-Pro V5 single section valve to be built to his own specifications.  Our engineer built the V5 single section valve using the following parts:-

V5-T4E      Inlet cover
V5-DE24   Worksection
V5-H          Lever Assembly
V5-T4PE   Outlet Cover (PCO)
V5-80         Bolt Set

P & R Hydraulics is a recently appointed Hy-Pro distributor.  We can supply assembled units, separate components and build units to your own specifications.  Please contact us for more information - tel 01603 424880.
 

V5 single section valve

Danfoss PVG32/4 valve assembly inspection

A Danfoss PVG32/4 valve assembly was brought to our workshop for inspection.  The valve was dismantled, all parts cleaned and inspected for wear.  The internal parts were badly worn and the valve was beyond economical repair.

Image showing badly worn internal parts of Danfoss PVG32/4 valve

P & R Hydraulics is an official sales partner for Danfoss Power Solutions and we can supply their products at competitive prices, covered by their manufacturer's waranty.  We have the ability to assemble all Danfoss PVG valves in our in-house workshop (PVG16, PVG32, PVG100 and PVG120).  Please contact us for more details on tel: 01603 424880 or mail@pandrhydraulics.com.

Biomass hydraulic power unit inspection

Our on-site hydraulic engineer was called out to inspect a biomass hydraulic power unit.  The valves and hydraulic pump were removed from the hydraulic power unit and taken back to P & R for inspection in our workshop.  No faults were found during the test procedure on the valves.  The engineer returned to site together with the tested valves, a replacement hydraulic pump and coupling.  The hydraulic power unit was reassembled and checked for leaks and operation.  Once satisfied that everything worked OK, our engineer left the site.

Biomass hydraulic power unit

For more information on our services please contact us on tel: 01603 424880 or mail@pandrhydraulics.com.